- Other Exterior Accessories[1]
- Other Motorcycle Accessories[10]
- Other Auto Parts[1]
- Balustrades & Handrails[1]
- Corner Guards[2]
- Other Door & Window Accessories[6]
- Flooring Accessories[10]
- Plastic Flooring[1]
- Kitchen Cabinet Parts & Accessories[6]
- Tile Accessories[1]
- Other Waterproofing Materials[5]
- Furniture Accessories[10]
- Other Furniture Parts[10]
- Contact Person : Ms. Yu Ling
- Company Name : Deemar Hardware Plastics Product Factory
- Tel : 0086-20-86739288
- Fax : 0086-20-86739968
- Address : Guangdong,guangzhou city,No.2,Hualing Industrial Area, Huadu Road West, Tanbu Town, Huadu District
- Country/Region : China
- Zip : 510800
Related Product Searches:PVC Ceramic Tile Edge; Plastic Tile Trim,High Quality,plastic edging of tile, pvc tile edging trim,LY-088
Feature:
1)Tough and Not easy to be damaged
2)Easy to make the corner in good shape with pleasure
3)keep drying and Hard to crack,and make the quality guarantee
4)Shorten time and improve the efficiency to 3 or 6 times.
5)weatherable grade, lead free,UV resistance, corrosion resistance, ignition resistance, low electrical.
PVC Tile Trim can be against rupture or cracked in plaster of engineering so that it can help to form straight
line on the corner, and to protect and reinforce the most vulnerable parts of the mortar. Angle beads play an
important role in a project. Because the wall corner is always damaged easily in the process of construciton.
It is convenient,easy and fast, so it can help the project save a lot of time.
Fixing:
Plumb vertical and embed in continuous line of adhesive mortar. The joints are to be embedded in silicone mastic
to prevent water ingress. Mechanical fixings are best avoided to prevent distortion of bead.
Storage:
Store flat away from heat and direct sun.
Installation:
1. Profiles should be chosen to match the thickness of the tiles.
2. Tile adhesive should be applied around the junction using a serrated trowel.
3. Press the profile into the adhesive bed and align it.
4. Spread mortar over the entire surface of the joint.
5. Press in tiles firmly and align them so that they are flush with the top edge of the profile.Lay the tiles without
leaving any gaps.